4166 18th Street NE
Willmar, MN 56201

Frequently Asked Questions

What type of lettering is this?
These are pre-pasted, pre-spaced, individually cut letters that press on your wall or any flat surface. These are not decals with clear film around the letters, but rather individually cut letters that have been pre-spaced for you. After pressing the pre-masked sheet to your wall, you pull pre-mask back and only the lettering remains. The letters are thin and equivalent to a couple of coats of paint, which gives you the look of hand-painted stenciling without the time and trouble. This is high quality vinyl that will not fade or crack.

How do I remove the lettering?
The vinyl is easy to remove. It works well for both home owners and renters because the lettering comes off when you want them to and without damage to your wall or paint. To remove, get a grip on the corner of each letter using your fingernail or tweezers and gently pull off the lettering. If you've had the lettering on the wall for a long period of time, you can soften them up by using a hair dryer to make it easier to remove. If any sticky residue is left, use alcohol or goo-gone. Exresssive Walls cannot be held responsible for damage to any paint or surface. We speak from our experience, and can not insure that all experiences will be the same. Please wait at least 3 weeks for new paint to dry and cure before applying letters.

Are there any surfaces this type of lettering won't work for?
This type of lettering sticks to almost any smooth or lightly textured surface like painted walls, glass, mirrors and smooth metal and wood, as well as ceramic tile. It will not stick to rough or uneven surfaces like cinder block, brick or stucco.

If you have any questions or comments regarding your vinyl lettering,
please contact

Expressive Walls at 320-214-8252.